Chapter 6. Panel Management
79
Batch Configure
The Batch Config function allows you to upload the same profile or same
setting changes to multiple RBS Panels all at once, instead of having to make
the same setting changes individually and repeatedly.
1. First, check the RBS Panels to which you want to batch configure.
2. Type the login passwords of the RBS Panels selected in the Panel
Password column, as illustrated below.
Note: If the RBS Panels to which you want to upload profiles and/or
setting changes share the same panel password, you can simply type
that common password in the Batch Password Authentication field
instead of having to type the same password repeatedly.
To Next Page
Loading...