ATEN VK430 - Changing the Passwords of RBS Panels; Changing the Password of One RBS Panel via the Panel; Changing the Passwords of Multiple RBS Panels by Batch

ATEN Room Booking System User Manual
84
Note: For first-time login, use the default password password to log in, and
you’re required to change the password.
3. Once logged in, you can change the panel’s password by tapping Change
Password and following the on-screen instructions.
4. Tap Save to finish.
Changing the Passwords of RBS Panels
You can change the password of one RBS panel or multiples by batch.
Changing the Password of One RBS Panel via the Panel
1. On the main page of the RBS panel, tap . The General settings page
appears.
2. Tap Password on the left to change the password.
3. Clive Save to apply the change.
Changing the Passwords of Multiple RBS Panels by Batch
To start, make sure all of the RBS Panels to be configured are connected within
the same network as your ATEN RBS Configurator and turned on.
1. On your RBS Configurator, go to the Panel Management tab and search
for the RBS Panels you want to change passwords for by 1 of the 2
following methods.
 Auto Scan: Automatically searches for all RBS Panels within the same
subnet.
 By IP: Searches for RBS Panels within the LAN by entering an IP
range or a specific IP address.