Sheet # 698f – Burst Test
Version 1.04a User guide ATEQ 6th series Page 4/4
1.3. AVAILABLE FUNCTIONS
The following list displays the available function for the leak test. For further information on
these functions see the corresponding sheet :
¾Burst = OK, this is to reverse the result, if the part will burst under pressure, it will be a
pass part.
¾Name, see sheet #602,
¾Sequencing, see sheet #603,
¾Automatic connector, see sheet #605,
¾Pre-fill and fill types, see sheet #608
¾Dump Off, see sheet #630,
¾External dump, see sheet #655,
¾Valves codes and auxiliaries output 24 V, see sheet #609,
¾End of cycle, see sheet #610,
¾Mini valve, see sheet #611,
¾Stamp, see sheet #617,
¾Buzzer, see sheet #639.
To Next Page
Loading...
