ATEQ F670 - Select Cal-Pa or Cal-Pa;S

Sheet #604u – Units function
Version 1.04a User guide ATEQ 6th series Page 2/4
Select Cal-Pa or Cal-Pa/s.
"Drift Unit": tolerance limit for the calibration
drift. Checked using the "CAL Check" special
cycle. If this value is exceeded, an alarm is
triggered (default value: 20%).
"NAME": Naming of the unit.
4#/2T

(70%6

70+6
Ź LeakUnit: Cal-Pa
Drift Unit : 020 %
NAME: TRIAL