Sheet # 602u –Name function
Version 1.04a User guide ATEQ 6th series Page 2/2
During the test cycle the name is displayed
(on top of the screen).
$1&;
100.0
mbar
TEST
050
Pa
005
Pr 01
Pa
1.4 s
To delete the name, enter the program
parameters menu, select "TYPE", then
validate with
.
2#4#/2T
Ź TYPE : LEAK TEST
COUPL A : 0.0 s
FILL TIME : 0.0 s
STAB TIME : 0.0 s
TEST TIME : Inf. s
DUMP TIME : 0.0 s
Press. UNIT: bar
Max FILL : 0.000
The name and program deletion menu is
displayed.
Note: if the program is deleted, the program
name is deleted too.
2T
6'566;2'
Ź Delete name
Reset program
To Next Page
Loading...
