Atlas Copco ACTA 3000

Programming ACTA ACTA 4000 User Guide
42 (136) 2008-12 9836 4171 01
Manual tight
Stat > Manual input > Tightening
Tool comment
Stat > Manual input > Tool Comment
Seq no.
Stat > Manual input > Sequence number
User
Manually input User ID (4 characters) responsible for each tightening until
next time user function is called. Conf > Interface > User > User ID >
manually
Deadweight calibration
Conf > Calibration > Deadweight
Tool calibration
Conf > Calibration > Tool
Track
Conf > Diagnostics > Track
Speed
Conf > Diagnostics > Speed
Shunt calibration
Conf > Diagnostics > Shunt Calibration
Communication
Conf > Communication
New tool
Datab > New tool
Select tool
Datab > Select tool
Select tool in appl.
Opens Select tool dialog with all tools in application present.
Select application
Open a dialog box which lets you select application.
Select zone
Opens a dialog which lets you select zone.
Select pset
Opens a dialog which lets you select Pset
Save trace
A.lyse > Save trace
Parameter
A.lyse > Parameter
Stat all
Stat > All tightening
Stat torque
Stat > Statistics torque
Stat angle
Stat > Statistics angle
Stat pulse
Stat > Statistics no of pulses
Pass tightening
Skip tightening and move on to the next
Zone result
Opens the Zone result window. See 6.4 Zone result window. This is a valid
choice only when zone is finished.