ACTA 4000 User Guide Programming ACTA
9836 4171 01 2008-12 45 (136)
About Routing
The Routing function, set in the Tightening interface dialog box, causes ACTA to select the tool for the
next tightening operation automatically. The flow of tools in the Tool Database list is managed by
ToolsTalk QAT. For more information, see ToolsTalk QAT user guide.
Tool routing
When tool routing is selected and the selected tool has a full batch of tightening operations, the next tool
in the list will be selected automatically. A full batch is obtained when the number of tightening operations
in the tool equals Batch size (Prog.4,1,1). See figure below for the tool selection order.
Tool Batch Tightenings
size 1234
BMX495 2
••
TUZ396 3
•••
RTN699 4
••••
MBU401 1
•
TSX112 2
••
Job routing
Job routing works on application name. The ACTA loops through all the applications Psets until all Psets
have full batches of tightening operations. A full batch is obtained when the number of tightening
operations in the tool equals Batch size (Prog.4,1,1). See figure below for the tool selection order.
Application Pset Batch Tigh tenings
nam e size 1 2 3 4
BMX495 None 2 • •
RTN691 1 3 • • •
RTN691 8 4 • • • •
RTN691 2 2 • •
TSX 312 1 2 • •
TSX 312 2 3 • • •
KLT658 7 2 • •
BG T618 None 3 • • •
To Next Page
Loading...
