Calibrating tools and equipment ACTA 4000 User Guide
92 (136) 2008-12 9836 4171 01
Other controller calibration
Use Other controller to calibrate for unknown or unsupported controlled tools. The controller torque values
must be entered manually. A new calibration torque is calculated and can be stored in the tool.
Display text Comments
X bar
Mean torque value.
X bar Contr
Mean controller torque. The
controller torque values are
entered manually.
New cal torque
New calculated calibration
torque for controller.
Xbar
ueOldcaltorqueNewcaltorq ⋅=
Soft key Comments
Store
Mark tightening operations as used in calibration. Printout question is asked.
Cancel
Close window.
Edit
Change the calculated calibration torque.
To Next Page
Loading...
