6.5 Storage after installation
Run the compressor, e.g. twice a week, until warm.
If the compressor is going to be stored without running from time to time, protective measures must be taken.
Consult Atlas Copco.
6.6 Service kits
General
Service kits comprise all parts needed for servicing components and offer the benefits of genuine Atlas Copco
parts while keeping the maintenance budget low. All service kits are indicated in the relevant Parts Lists.
Atlas Copco Roto-Inject Fluid
Roto-Inject Fluid can be ordered in the following quantities:
• 20-litre can: 2901 0522 00
• 209-litre drum: 2901 0045 01
See the section Oil specifications.
Atlas Copco Roto-Xtend Duty Fluid
Roto-Xtend Duty Fluid can be ordered in the following quantities:
• 5-litre can: 2901 1700 00
• 20-litre can: 2901 1701 00
• 209-litre drum: 2901 1702 00
See Oil specifications.
Instruction book
132 2920 1728 05
To Next Page
Loading...
