12 Pressure equipment directives
Category IV
Product:
• GA 110 VSD
• GA 132 VSD
• GA 160 VSD
This machine is a pressure assembly of cat. IV according to 97/23/EC.
Parts of article 3.3 of 97/23/EC are subject to good engineering practice.
Parts of category I according to 97/23/EC are integrated into the machine and fall under the exclusion of article
I, section 3.6.
The following pressure bearing parts are of category higher than I :
Oil separator vessel : Cat IV
Design pressure 15 bar(e), content 290 l
Design standard : ASME section VIII div. 1.
Safety valve : Cat IV
Design code : AD-Merkblätter, A2
Instruction book
160 2920 1728 05
To Next Page
Loading...
