EasyManua.ls Logo

Atlas Copco GA 160 VSD

Atlas Copco GA 160 VSD
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. Remove the plastic bag and reposition the bowl.
A small amount of paint compatible lubricant ( e.g . FOODLUBE EXTREME) may be applied
to screw threads and O-rings to facilitate the assembly.
7.3 Service intervals
The following service intervals should be observed:
For filters operating less than 4000 hours per year: 12 months.
For filters operating 8000 hours per year: 4000 hours or 6 months, whichever comes first.
7.4 Filter disposal
Used filters must be disposed of in an environmentally friendly and safe manner, and in line with the local
recommendations and environmental legislation.
7.5 Reference conditions
Air inlet pressure 7 bar(e) 102 psig
Air inlet temperature 20˚C 68 ˚F
Ambient temperature 20˚C 68 ˚F
7.6 Principal data
Maximum compressed air inlet pressure 16 bar(e) 232 psig
Minimum compressed air inlet pressure 1 bar(e) 15 psig
Minimum compressed air inlet temperature 1˚C 34˚F
Maximum compressed air inlet temperature 65˚C 149 ˚F
Maximum compressed air inlet pressure 16 bar(e) 232 psig
Minimum ambient temperature 1˚C 34 ˚F
Maximum ambient temperature 65˚C 149 ˚F
Maximum recommended pressure drop 0.35 bar(e) 5 psig
Instruction book
134 2920 1728 05

Table of Contents

Related product manuals