Reference Designation
(4) Compressor air outlet, if dryer is by-passed
(5) Compressor air outlet, Full-Feature compressors
(6) Motor ventilation, air outlet
(7) Motor ventilation, air inlet
(8) Compressor air inlet
(9) Cooling air outlet
(10) Dryer cooling air outlet
(11) Dryer and motor cooling air inlet
(12) Compressor air inlet
(13) Only C can be ducted
(14) Only C and G can be ducted
(15) Cubicle ventilation inlet
(16) Cubicle ventilation outlet
(17) C & F (if ducted) should be ducted separately
(18) Cooling air inlet
(19) Only C, F and G can be ducted
(20) Motor ventilation, air inlet and dryer cooling air inlet
(21) Only C, E and D can be ducted
(22) C & E (if ducted) should be ducted separately
(23) Only F, E and B can be ducted
(24) F & E (if ducted) should be ducted separately
Description
Holes in the cubicle which are not used should be plugged.
All electric screens in the control cubicle and drive cubicle have to be installed before start-
up and remain installed during operation.
Instruction book
2920 1728 05 83
To Next Page
Loading...
