Description
Reference Designation
(1) Status menu
(2) Inputs menu
(3) Outputs menu
(4) Counters menu
(5) Auxiliary equipment menu
Status menu
Tap the Status icon to enter the Status menu.
This menu shows the current status of the unit.
If an alarm is active, it can be viewed by tapping the alarm message. To reset an alarm, tap the
reset button (1).
Before remedying, consult the Safety precautions.
Before resetting a warning or shutdown message, always solve the problem. Frequently
resetting these messages without remedying may damage the unit.
Inputs menu
Tap the Inputs icon to enter the Inputs menu.
Instruction book
2920 7109 51 71
To Next Page
Loading...
