5.3 Putting into operation (commissioning)
1. Verify that the OSCi drain valves (4) are closed.
2. Unscrew the clamping ring (1) of the cover of the first vessel of the OSCi and take off the
cover (2).
3. Take out the CDROM and the box (3) with the test bottle and the reference bottle and keep
them in a safe place nearby the compressor.
4. Take the ISO 7-R ½ connection and the G ¼ ball valve with seal and screw them into the
corresponding threads in the drain plate at the backside of the external box (Drain plate).
Close the condensate sample valve.
Instruction book
96 2920 7109 51
To Next Page
Loading...
