Reference Designation Function
(1) User A basic set of parameters is visualized, no password required.
(2) Service A basic set of parameters can be modified, no password required.
(3) Full This access level is not accessible to end users.
(4) Decline Tap to decline the selected user level.
(5) Confirm Tap to confirm the selected user level.
Service access level
Tap the Service access level icon (1) and confirm (2).
The screen information bar (1) now shows the current status of the unit instead of the machine
serial number.
The Received Signal Strength Indicator (RSSI) value is now shown in the Internal SmartBox
menu. See Quick access screen.
In the service menu, an extra menu item is now available. See Service menu.
4.16 Web server
All controllers have a built-in web server that allows direct connection to the company network or
to a dedicated PC via a local area network (LAN). This allows to consult certain data and settings
via a PC instead of the display of the controller.
Getting started
Make sure you are logged in as administrator.
• Use the internal network card from your computer or a USB to LAN adapter.
• Use a UTP cable (CAT 5e) to connect to the controller (see picture below).
Instruction book
2920 7109 51 83
To Next Page
Loading...
