• Open your browser and type the IP address of the controller you want to view in your
browser (in this example http://192.168.100.100). The interface opens:
Screen shot (example!)
Navigation and options
• The banner shows the unit type and the language selector. In this example, three languages
are available on the controller.
• On the left side of the interface, you can find the navigation menu.
If a license for ESi is foreseen, the menu contains 3 buttons.
• Machine: shows all generator settings.
• ES: shows the ESi status (if a license is provided).
• Preferences: allows to change temperature and pressure unit.
Instruction book
2920 7109 51 87
To Next Page
Loading...
