- 32 -
Show mobile
overview
No
Enable this to show the mobile overview page which is designed for Marine and Remote Vehicle applications. This overview gives
direct access to the AC Current limit as well as the On/Off/Charger-only settings and pump control. Also shows up to four tank levels.
Language English Choose between English, Dutch, Chinese, German, Spanish, French, Italian, Swedish, Turkish and Arabic.
VRM online portal
Log interval 15 minutes
Set to anything between 1 minute and 1 day. Choose longer times on systems with an unreliable connection. Note that this setting does not
affect reporting problems and state changes (bulk → absorption) to the VRM Portal. These events initiate an immediate transmission of
all parameters.
Rest of parameters Please contact Atlas Copco for more details.
Wireless AC Sensors
Select the position for each AC sensor (PV Inverter on AC-input 1, 2 or on AC-output).
Energy meters
Configure the Energy meters, used to:
Measure the output of a PV Inverter.
Measure and regulate a Hub-4 system.
Measure and regulate a ESS system.
Measure the output of an AC Generator.
ESS
Configure Energy storage system (ESS).
Hub-4
Configure Hub-4 system.
Ethernet
Select the configuration type (DHCP vs. manual configuration) and IP settings.
Wi-Fi
Manage wireless networks and IP settings.
GPS
Format Select the format in which to show the Latitude and Longitude.
Speed unit km/h Choose between km/h, meters per second, miles per hour, or knots.
Item Default Description
00_00_ZBP45_EN.book Page 32 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...