To Next PageTo Next PageWhy is there no subject displayed when the camera is activated on my AU Cell Phone?
Check the position of the camera (lens) and remove any obstacle, such as a finger or other object, that may be covering it.
What to do if my AU pt003 cannot make calls?
Ensure that the power is turned on by holding down the F button for at least one second. If the out of range indicator is displayed, move to a location where it is no longer displayed and check the Area Setting. Also, verify that your hand or a metal object is not covering the area around the built-in antenna. When calling a phone other than a cell phone, enter the area code, even if you are in the same area.
Why does my AU pt003 Cell Phone beep when making a call?
If the out of range indicator is displayed, or you are in a location where the signal is too weak, move to a location where the out of range indicator is no longer displayed and check the Area Setting. It's also possible that the wireless line is busy or the phone you are calling is on another line; in this case, end the call and try again later.
How to increase earpiece volume on AU pt003?
During a call, press the u button to increase the earpiece volume.
What to do if AU pt003 Cell Phone has no response when a key is pressed?
Make sure the power is turned on by holding down the F button for at least one second.
Why does my AU pt003 beep and turn off?
This usually happens when the battery pack doesn't have enough power left. Charge the battery pack to resolve this issue.
Why AU pt003 battery is not charging?
Check if the battery pack is installed properly and ensure that the plug and connector of the AC adapter are firmly inserted.
What to do if my AU pt003 cannot turn on?
First, ensure the battery pack is charged. If not, charge the battery pack. Also, make sure you hold down the F button for at least one second.
Why AU pt003 Cell Phone cannot receive calls?
If your AU Cell Phone cannot receive calls, move to a location where the out of range indicator is not displayed. Also, ensure that the power is on by holding down the F button for at least one second.
Why AU pt003 cannot make calls?
If your AU Cell Phone cannot make calls, ensure the power is on by holding down the F button for at least one second. Check if the out of range indicator is displayed; if so, move to a location where it isn't. Also, make sure your hand or any metal object isn't covering the built-in antenna. Finally, when calling a non-cell phone, enter the area code, even if you're in the same area.
Explains variations between manual illustrations and the actual phone.
Explains simplifications and variations in manual screenshots.
Guidelines for using the cell phone considerately in various public and private settings.
Warns against using the phone while driving due to safety and legal risks.
Lists items included in the cell phone package.
Identifies and labels key physical components of the phone.
Introduces fundamental operations and key assignments on the phone.
Instructions on how to initiate a phone call.
Procedures for receiving incoming calls.
How to redial numbers from call history.
How to set up and use the e-mail service on the phone.
Recommended settings for filtering unwanted e-mail.
General| Brand | AU |
|---|---|
| Model | pt003 |
| Category | Cell Phone |
| Language | English |
