Audient ASP8024 HERITAGE EDITION - Connector Panels: Sub Groups, Mix, External

34
1 SUB GROUP INSERTS 1-8. This panel carries the
connectors for the Sub Group Insert Points. There
are 8 Sub Groups and each has a Send Output and
a Return Input.
2 MIX OUTS 1,2,3. After the Master Fader, the stereo
Mix Bus is sent to three Mix Outputs. These can
be sent to anything that is capable of capturing
a stereo signal.
3 EXTERNAL INPUTS 1,2,3. The three External Inputs
allow you to monitor up to three additional
inputs as well as the stereo Mix Bus. This could
be anything from a CD player, a MP3 player or
even a sidecar console.
Connector Panels
1
Signal is always present on the Send Output. If
required, the Insert Returns could be used as very
basic inputs to the stereo mix bus during mixdown,
from a submixer or sampler for example.
Having three separate Mix Outputs means you
can capture up to three copies of the mix at the
same time.
3
2