AudioCodes MP-124 - Figure 7-2: Load a Cmp File Screen; Figure 7-3: Cmp File Successfully Loaded into the Device Notification

Analog Fast Track Guide 7. Upgrading the MediaPack
Version 5.0 35 October 2006
3. Click the Start Software Upgrade button; the ‘Load a cmp file’ screen appears (Figure 7-2).
Note: When in the wizard process, the rest of the Web application is unavailable and
the background Web screen is disabled. After the process is completed,
access to the full Web application is restored.
Figure 7-2: Load a cmp File Screen
4. Click the Browse button, navigate to the cmp file, and then click Send File; the cmp file is
loaded to the device and you’re notified as to a successful loading (refer to Figure 7-3).
Figure 7-3: cmp File Successfully Loaded into the Device Notification
5. Note that the four action buttons (Cancel, Reset, Back, and Next) are now activated
(following cmp file loading).
http://ArtTel.ru