EasyManuals Logo

AudioCodes MP-124 Fast Track Guide

AudioCodes MP-124
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Analog Fast Track Guide 1. Quick Start
Version 5.0 7 October 2006
1 Quick Start
This guide provides you with information on how to install the MediaPack for the first time. Prior
knowledge of IP networks is preferred.
Refer to the configuration procedures, outlined in Figure 1-1, for information on how to install,
initialize, configure the device and make calls. For detailed information on how to fully configure
the gateway refer to the MediaPack User’s Manuals.
Figure 1-1: Required Steps to Install the MediaPack
Refer to Section 2.1.1
for MP-11x and
Section 2.2.1 for
MP-124
Refer to Section 2.1.4
for MP-11x and
Section 2.2.3 for
MP-124
Refer to Section 2.1.5
for MP-11x and
Section 2.2.4 for
MP-124
Refer to Section 3.1
Refer to Section 3.4
http://ArtTel.ru

Table of Contents

Other manuals for AudioCodes MP-124

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MP-124 and is the answer not in the manual?

AudioCodes MP-124 Specifications

General IconGeneral
ModelMP-124
CategoryGateway
Analog Ports24 FXS
Ethernet Ports2
Protocol SupportSIP, H.323
Fax SupportT.38, G.711 pass-through
Power Supply100-240VAC, 50-60Hz
Operating Temperature0°C to 40°C
Voice CodecsG.711, G.729, G.723.1, G.726
ManagementSNMP
Storage Temperature-20°C to 70°C
Humidity10% to 90%, non-condensing
Network Interface10/100Base-T Ethernet

Related product manuals