MediaPack
Analog Fast Track Guide 40 Document #: LTRT-59805
¾ To save the loaded auxiliary files to flash memory and reset the
gateway, take these 3 steps:
1. On the main menu bar, click the Maintenance button; the 'Maintenance Actions' screen is
displayed.
2. Saving an auxiliary file to flash memory may disrupt traffic. Therefore, disable all traffic on
the device by performing a Graceful Lock:
a. Under the 'LOCK / UNLOCK' group, select 'Yes' from the 'Graceful Option' drop-down
list.
b. In the 'Lock Timeout' field, enter the time (in seconds) after which the gateway locks.
c. Click LOCK; now new calls are accepted and the gateway locks and terminates all calls
after the 'Lock Timeout' value expires. Note that if no traffic exists and the time has not
yet expired, the gateway locks.
3. Under the 'RESET' group, select the 'Yes' option from the 'Burn to FLASH' drop-down list,
and then click Reset; the auxiliary files are saved into flash and the MediaPack restarts. This
takes approximately two minutes to complete. When the MediaPack completes the restart,
the Power and Ready LEDs on the front panel are lit green.
http://ArtTel.ru
To Next Page
Loading...
Need help?
General
