AUTOFLAME Mk8 MM Installation And Commissioning Guide

3 Water Level Control
Page 58 Mk8 MM Expansion Features Installation and Set-Up Guide 04.09.2016
3.8.5 Setting 1
st
Low Level
Figure 3.8.5.i Commission 1
st
Low Level
After storing or updating the 2
nd
low level, press to increase the water level to the 1
st
low
level.
Once the water has risen to the required 1
st
low level, turn the pump off and close the valve. Let the
readings settle and press . If required, the 1
st
low level can be updated by then adjusting
the water level and pressing once the position has been stored.

AUTOFLAME Mk8 MM Specifications

General

Brand	AUTOFLAME
Model	Mk8 MM
Category	Controller
Language	English