AUTOFLAME Mk8 MM Installation And Commissioning Guide

3 Water Level Control
Page 60 Mk8 MM Expansion Features Installation and Set-Up Guide 04.09.2016
3.8.7 Setting HIGH Level
Figure 3.8.7.i Store High Water Level
After storing or updating the control point level, press to increase the water level to the
high water level.
Once the water has risen to the required high water level, turn the pump off and close the valve. Let the
readings settle and press . If required, the high water level can be updated by then
adjusting the water level and pressing once the position has been stored.

AUTOFLAME Mk8 MM Specifications

General

Brand	AUTOFLAME
Model	Mk8 MM
Category	Controller
Language	English