Figure 2.1.iii Commission Mode
The Commission Mode screen gives information on the following:
•
Current selected fuel
•
Which fuels have been commissioned
•
Number of times the unit has been commissioned
•
Serial number
•
Bootloader version
•
BC, MM and Display software
In Commission Mode, the engineer can:
•
Adjust options, parameters and expansion options
•
Configure first out settings and labels
•
Set the time and date
•
Upload/download commissioning data
•
Unlock expansion features
•
Set the language
•
View fault logs, system log and diagnostics
Note: Commissions may only be carried out with a fully unlocked Mk8 MM. The number of commissions will remain
at zero unless the unit has been fully unlocked at any time and will not increment while in flame safeguard mode.
To Next Page
Loading...
Need help?
General
