Chapter 3: Configuration and Parameters
Page 3–63Stellar
®
SR55 Series Soft Starter User Manual – 1st Ed, Rev F – 09/18/2019
parameTer deTails – “log” menu of parameTers (ConTinued)
Each SR55 is tested at the factory, and each unit may have a brief log history from this
testing.
P17.2 – Last Trip -2 Type:
Description:
Read Only
Displays the last Fault trip -2.
• Refer to “Trip Code Descriptions” in this chapter.
Range: Modbus Decimal Value: Default:
• Trip: 0 – 65,535
• Trip Time: hh:mm:ss
• linear scale ( 1 = 1 )
• Time (ms) since midnight
(bytes5,4,3,2) and Days since
01/01/1984 (bytes1,0)
• 0
• GMT
Modbus Address: Modbus Format:
• 60610 ( ECC2 hex )
• 60678 ( ED06 hex )
• 16-bit unsigned
• 6 Bytes
Touchscreen Menu Path:
Home → Log → Trip Log → Last Trip -2
P17.3 – Last Trip -3 Type:
Description:
Read Only
Displays the last Fault trip -3.
• Refer to “Trip Code Descriptions” in this chapter.
Range: Modbus Decimal Value: Default:
• Trip: 0 – 65,535
• Trip Time: hh:mm:ss
• linear scale ( 1 = 1 )
• Time (ms) since midnight
(bytes5,4,3,2) and Days since
01/01/1984 (bytes1,0)
• 0
• GMT
Modbus Address: Modbus Format:
• 60611 ( ECC3 hex )
• 60681 ( ED09 hex )
• 16-bit unsigned
• 6 Bytes
Touchscreen Menu Path:
Home → Log → Trip Log → Last Trip -3
P17.4 – Last Trip -4 Type:
Description:
Read Only
Displays the last Fault trip -4.
• Refer to “Trip Code Descriptions” in this chapter.
Range: Modbus Decimal Value: Default:
• Trip: 0 – 65,535
• Trip Time: hh:mm:ss
• linear scale ( 1 = 1 )
• Time (ms) since midnight
(bytes5,4,3,2) and Days since
01/01/1984 (bytes1,0)
• 0
• GMT
Modbus Address: Modbus Format:
• 60612 ( ECC4 hex )
• 60684 ( ED0C hex )
• 16-bit unsigned
• 6 Bytes
Touchscreen Menu Path:
Home → Log → Trip Log → Last Trip -4
To Next Page
Loading...
