Automation Direct Stellar SR55 Series User Manual

Page 3–64 Stellar
®
SR55 Series Soft Starter User Manual – 1st Ed, Rev F – 09/18/2019
Chapter 3: Configuration and Parameters
parameTer deTails – “log” menu of parameTers (ConTinued)
Each SR55 is tested at the factory, and each unit may have a brief log history from this
testing.
P17.5 – Last Trip -5 Type:
Description: Read Only
Displays the last Fault trip -5.
• Refer to “Trip Code Descriptions” in this chapter.
Range: Modbus Decimal Value: Default:
• Trip: 0 – 65,535
• Trip Time: hh:mm:ss
• linear scale ( 1 = 1 )
• Time (ms) since midnight
(bytes5,4,3,2) and Days since
01/01/1984 (bytes1,0)
• 0
• GMT
Modbus Address: Modbus Format:
• 60613 ( ECC5 hex )
• 60687 ( ED0F hex )
• 16-bit unsigned
• 6 Bytes
Touchscreen Menu Path:
Home → Log → Trip Log → Last Trip -5
P17.6 – Last Trip -6 Type:
Description: Read Only
Displays the last Fault trip -6.
• Refer to “Trip Code Descriptions” in this chapter.
Range: Modbus Decimal Value: Default:
• Trip: 0 – 65,535
• Trip Time: hh:mm:ss
• linear scale ( 1 = 1 )
• Time (ms) since midnight
(bytes5,4,3,2) and Days since
01/01/1984 (bytes1,0)
• 0
• GMT
Modbus Address: Modbus Format:
• 60614 ( ECC6 hex )
• 60690 ( ED12 hex )
• 16-bit unsigned
• 6 Bytes
Touchscreen Menu Path:
Home → Log → Trip Log → Last Trip -6
P17.7 – Last Trip -7 Type:
Description: Read Only
Displays the last Fault trip -7.
• Refer to “Trip Code Descriptions” in this chapter.
Range: Modbus Decimal Value: Default:
• Trip: 0 – 65,535
• Trip Time: hh:mm:ss
• linear scale ( 1 = 1 )
• Time (ms) since midnight
(bytes5,4,3,2) and Days since
01/01/1984 (bytes1,0)
• 0
• GMT
Modbus Address: Modbus Format:
• 60615 ( ECC7 hex )
• 60693 ( ED15 hex )
• 16-bit unsigned
• 6 Bytes
Touchscreen Menu Path:
Home → Log → Trip Log → Last Trip -7

Automation Direct Stellar SR55 Series Specifications

General

Brand	Automation Direct
Model	Stellar SR55 Series
Category	Controller
Language	English