1408, 1416, 1608 and 1616 Phone Guide Page 131
15-601040 Issue 04d (25 January 2011)IP Office
Phone Settings: Auto Lock
18.7 Ringer Controls
This section covers controls for adjusting the ringing used by your phone.
· Switch the Ringer On/Off
· Flash the message lamp for calls (Visual Alerting)
· Audible Alerting On/Off
· Coverage Ring
· Ring Sound
· Ring Volume
· Internal Auto Answer
Calls are presented with a number of different ring patterns.
· Internal Calls: Repeated single ring.
· External Calls: Repeated double ring.
· Ringback/Return Calls: Repeated single-ring followed by two short rings.
This type of ring is used for calls that are returning to your phone. For example, a call that you put on hold and
which is returning due to being left on hold too long.
· Coverage Ring: Variable
You can also adjust the ringing used for call coverage and bridged appearance buttons. See Coverage Ring . The
options are normal ringing, an abbreviated ring (a non-repeated single ring) or no ring.
· Attention Ring: Variable
The system administrator can adjust the ring used for new calls when you are already talking to a caller. The
options are an abbreviated ring (a non-repeated single ring) or no ring.
· For calls alerting on a call coverage or bridged appearance button when you are already on a call, the shorter
of the coverage ring or attention ring settings is used.
The system administrator can also adjust the when ringing is used for each specific appearance button. The ringing can be
immediate, delayed for a set time or off.
18.7.1 Disabling the Ringer
This option can be used to turn off the ringer for all calls. If set to no ring, this disables both the phones audible alerting
and visual alerting settings.
1.
Press the Features soft key if shown.
· To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2.
Use the up and down arrow keys to scroll the display to the option Call Settings.
3.
Press the Select soft key or the OK button or the right arrow key.
4.
Use the up and down arrow keys to scroll the menu to Disable Ringer.
5.
Press the Change soft key to change the setting. Selecting On will turn the ringer off.
131
132
132
132
133
134
134
132
132 132
To Next Page
Loading...
