1408, 1416, 1608 and 1616 Phone Guide Page 161
15-601040 Issue 04d (25 January 2011)IP Office
System Administration: Setting the Time
21.5 Setting the Time Offset
1.
Press the Features soft key if shown.
· To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2.
Use the up and down arrow keys to scroll the display to the option Phone User.
3.
Press the Select soft key or the OK button or the right arrow key.
4.
Use the up and down arrow keys to scroll the display to the option System Admin. If the option is not
present then you may not have been configured as a system phone user by your system administrator.
5.
Press the Select soft key.
6.
Enter your security code (this is the same as your login code) and press the Done soft key.
7.
Use the up and down arrow keys to scroll the display to the option Time Offset or UTC Offset.
8.
Press the Select soft key or the OK button or the right arrow key. The current offset is displayed.
9.
Enter the offset required in hours and minutes:
· To enter the : separator press either the * or # key.
· To delete the previous digit or character entered press the left arrow key.
· To change the offset from between positive or negative press the +/- soft key.
10.
When a valid offset has been entered, the Done soft key is displayed.
11.
To apply the offset to the current telephone system time press the Done soft key.
To Next Page
Loading...
