1408, 1416, 1608 and 1616 Phone Guide Page 179
15-601040 Issue 04d (25 January 2011)IP Office
The Phone Menus: System Admin Menu
22.11 Error Screens
NoUser
This screen is displayed when there is no user currently logged in on the phone.
The phone can still be used for internal and emergency calls. To login press
Select.
PHONE LOCKED
This screen is displayed if the user has locked it. The phone can still be used to
make and receive internal calls and to make emergency calls. If it is your phone
you can unlock it using your login code. If it not you phone, you can still login .
Enter Extension
This screen is displayed on an unregistered phone. 1608 and 1616 only.
Discover
This screen typically indicates that the phone has lost connection with the
telephone system for a period of several minutes. Contact your system
administrator if this remains. 1608 and 1616 only.
Boot
This screen is shown by a phone that has just been powered on or has been
remotely restarted by the system administrator. It indicates that the phone is
loading its own software. This will typically be followed by the screens below in
sequence. 1608 and 1616 only.
Ethernet
Shown following a restart of the phone. Indicates the network connection has been
established. Do not press * unless you have been instructed to do so by your
system administrator. 1608 and 1616 only.
DHCP
Shown following a restart of the phone. The phone is waiting for information from
the DHCP server. Do not press * unless you have been instructed to do so by your
system administrator. 1608 and 1616 only.
HTTP/HTTPS
Shown following a restart of the phone. The phone may go through a process of
requesting files and downloading those files. This should only last a few seconds.
However if the system administrator has done this to install new phone software it
may take several minutes and should not be interrupted. 1608 and 1616 only.
To Next Page
Loading...
