INSTALLATION EXAMPLE: DEFINITY GENERIC 2 WITH UNIVERSAL MODULES
10-5
—
Self-supporting frames.
Mounting the terminal blocks on self-supporting frames requires seven
type-1 frames or seven type-2 frames.
Figure 10-3,
7-Module System Mounted on Self-Supporting Type-1 Frame, Front,
and figure 10-4,
7-Module System Mounted on Self-Supporting Type-1 Frame, Rear,
display the front and rear of
a type-1 frame.
Since this is a zone installation, distribution cable is separated on the MDF.
This is a good arrangement with room for expansion and effective cable management.
I
I
Figure 10-3. 7-Module System Mounted on Self-Supporting Type-1 Frame, Front
To Next Page
Loading...
