xiv ABOUT THIS DOCUMENT
HOW TO USE THIS DOCUMENT
Chapters 1 through
5
apply to System 85 and DEFINITY Generic 2 with traditional modules. Chapters
6 through 11 apply to DEFINITY
Generic 2 with universal modules. Chapters 12 through 14 apply to
adjunct power supplies, fiber-optics, and insert labels; this information is common to both System 85
and DEFINITY Generic 2.
TRADEMARKS AND SERVICE MARKS
●
●
●
●
●
●
●
●
●
IBM® is a registered trademark of International Business Machines Corp.
IBM Token Ring LAN® is a registered trademark of International Business Machines Corp.
MS-DOS® is a registered trademark of Microsoft Corp.
CP/M® is a registered trademark of Digital Research Inc.
UNIX® is a registered trademark of AT&T.
DIMENSION® is a registered trademark of AT&T.
DEFINITY® is a registered trademark of AT&T. In this document, DEFINITY Communications
System Generic 2 is often abbreviated to DEFINITY
Generic 2, Generic 2, DEFINITY
G2, or G2.
Linx® is a registered trademark of Illinois Tool Works Linx (TTW).
Delta® is a registered trademark of Porta Systems Corp.
RELATED RESOURCES
Following are a list and brief descriptions of additional documents that you may find helpful.
●
Premises Distribution System Design Guide
(555-400-602). A document for readers who are
familiar with distribution systems and the hardware and cabling necessary for their construction
Provides step-by-step instruction in designing a PDS for a building or a campus of buildings even
when the specific voice or data systems are not known, plus information on specific PDS
components and methods. Not intended as a tutorial in PDS.
NOTE: The Premises
Distibution System Design Guide
(555-400-602) cannot be ordered from the
AT&T Customer Information Center. Provided on a proprietary basis to select, certified PDS
vendors and to PSCs who attend the PDS design training course.
●
DEFINTY™ Communic
ation System Generic 2 and System 85 Equipment Room Floor Plans and *
Specifications
(555-104-603). An instruction document for preparing an equipment room floor plan
for DEFINITY Generic 2 and System 85. Includes general req
uirements, customer responsibilities,
preparation of the layout, and guidelines for protecting equipment on construction sites.
●
DEFINITY™ Communications System Generic 2 and System 85 Electrical Protection, Grounding,
and Exposure Checklist (555-104-120). A checklist of conditions that must be met to ensure
adequate electrical protection for a DEFINITY Generic 2 or System 85 installation. For engineering,
plant maintenance, installation, and quality acceptance personnel. Included are electrical protection,
grounding, and exposure reference information and checklists.
To Next Page
Loading...
