Parameter Type Default
value
Description
- 5061 for TLS
• transport is the optional transport type, tls, tcp, or
udp. If you do not specify the transport, the system
uses TLS as the default type
SIMULTANEOUS_REGISTRA
TIONS
Numeric 3 Specifies the number of simultaneous Session
Manager and Branch Session Manager registrations
that the device can maintain. The range is from 1 to
3.
ENABLE_PPM_SOURCED_SI
PPROXYSRVR
Numeric 1 Specifies whether to enable PPM as a source of SIP
proxy server information. Assign one of the following
values:
• 0
• 1
SIPDOMAIN String Null Specifies the SIP domain name for registration. The
range is from 0 to 255.
SIPPORT Numeric 5060 Specifies the port the deskphone opens to receive
the SIP signaling messages over TCP. This is the
listening port when SIP/TCP is used and dual socket
is used with Avaya Aura
®
Session Manager, that is,
the CONNECTION_REUSE parameter is 0.
You can set this parameter only if the environment is
not an Avaya environment. The range is from 1024
to 65535.
SIP_PORT_SECURE Numeric 5061 Specifies the default SIP port for secure message
transfer through TLS. This is the listening port when
SIP/TLS is used and dual socket is used with Avaya
Aura
®
Session Manager, that is, the
CONNECTION_REUSE parameter is 0.
You can set this parameter only if the environment is
not an Avaya environment. The range is from 1024
to 65535.
PRESENCE_SERVER String Null Specifies the address and optional port of a single
Presence server. The range is from 0 to 255
characters.
MWISRVR String Null Specifies a list of IP or DNS addresses for Message
Waiting Indicator Event Server. The range is from 0
to 255 characters.
You can set this parameter only if the environment is
not an Avaya environment
SNTPSRVR String Null Specifies a list of IP or DNS addresses for the SNTP
server. The range is from 0 to 255 characters.
Table continues…
General parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 37
Comments on this document? infodev@avaya.com