Chapter 5: Using local Administrative Menu
procedures
About Administration Menu procedures
During or after you successfully install an IP phone, a system message might instruct you to
administer one of the manual procedures described in this chapter. These local administrative
procedures are also referred to as Administration Menu procedures.
Local Administrative Options has one form that provides access to all the capabilities and
functions described in this chapter.
Note:
You can modify the settings file to set parameters for any IP phones that download their
upgrade script and application files from the same HTTP server. For more information, see
Administering Avaya B189 Conference IP Phone.
Caution:
Only trained installers or technicians should perform local administrative procedures.
Perform these procedures only if instructed to do so by the system or LAN administrator.
Static administration of these options causes upgrades to work differently with static
administration of these options than by dynamic administration. Values assigned to options
in static administration do not change with upgrade scripts. These values remain stored in
the phone until one of the following happens:
• You download a new boot file
• You reset the IP phone. See
Resetting system values on page 35.
Use these option-setting procedures only with static addressing and, as always, only if
instructed by the system or LAN administrator. Do not use these option-setting
procedures if you are using DHCP. DHCP is the Dynamic Addressing Process, as
indicated in
Powering-up and resetting the phone (Dynamic Addressing Process) on
page 14.
Installing and maintaining Avaya B189 Conference IP Phone January 2014 25
To Next Page
Loading...
