Restarting the phone
About this task
Use the following procedure to restart the phone.
Procedure
1. Select RESTART PHONE from the Administration Procedures screen. The phone
displays the following text:
Press Restart to confirm.
2. Tap Cancel to return to the Administration Procedures screen without restarting the
phone.
Press Restart to proceed with the registration steps. For more information, see
Powering-up and resetting the phone (Dynamic Addressing Process) on page 14.
A restart does not affect user-specified data and settings like Contacts data or the
phone login and password.
The completion of the restart procedure depends on the status of the boot and
application files.
Changing SSON settings
About this task
Caution:
Do not perform this procedure if you are using static addressing. Perform this procedure
only if you are using DHCP and the LAN administrator instructs you to do this.
Note:
When updating Administration Procedures from a touch screen phone, touching the line you
want to change or the applicable softkey produces the same result as selecting a line and
pressing the applicable softkey on a non-touch screen IP phone.
Use the following procedure to set the Site-Specific Option Number (SSON).
Using local Administrative Menu procedures
36 Installing and maintaining Avaya B189 Conference IP Phone January 2014
Comments? infodev@avaya.com
To Next Page
Loading...
