• All system values and system initialization values.
• 802.1X identity and password.
• User options, parameter settings, identifiers, and password.
After clearing the values, the phone resets.
Changing the group identifier
About this task
Use the following procedure to set or change the group identifier.
Note:
Perform this procedure only if the LAN Administrator instructs you to do so. For more
information about groups, see
Applying settings to logical groups on page 24.
Procedure
1. Select Group from the Administration Procedures screen.
The screen displays the Group text box.
2. In the Group text box, enter a valid Group value from 0 to 999.
3. Tap Save to store the new setting. The deskphone displays the Administration Menu
screen.
Changing Ethernet interface control
About this task
Use the following procedure to set or change the interface control value.
Procedure
1. When you select INT from the Administration Procedures screen, the phone
displays the following options:
The options that are displayed are the text strings associated with the current
PHY1STAT on the Ethernet line.
Changing the group identifier
Installing and maintaining Avaya B189 Conference IP Phone January 2014 33
To Next Page
Loading...
