Resetting system values
About this task
Note:
When updating Administration procedures from a touch screen deskphone, touching the
line you want to change or the applicable softkey produces the same result as selecting a
line and pressing the applicable softkey on a non-touch screen IP deskphone.
Use the following procedure to reset all system initialization values to the application software
default values.
Caution:
This procedure erases all static information, without any possibility of recovering the data.
Procedure
1. Select RESET VALUES from the Administration Procedures screen. The
deskphone displays the following text:
Press Reset to confirm.
2. Press Cancel to return to the Administration Procedures screen without resetting
the deskphone.
Press Reset to start the deskphone reset.
The deskphone resets from the beginning of registration, which might take a few
minutes. The deskphone resets:
• All system values and system initialization values except AUTH and NVAUTH
to default values.
• The 802.1X ID and Password to their default values.
• Call server values to their defaults.
• Any entries in the Redial buffer.
• Do not affect user-specified data and settings like Contacts data or the
deskphone login and password. To remove this type of data, see
Clearing the
deskphone settings on page 32.
Resetting system values
Installing and maintaining Avaya B189 Conference IP Phone January 2014 35
To Next Page
Loading...
