Local administrative menu
Using the administrative procedures, you can customize the IP deskphone installation for your
specific operating environment. This section provides a description of each local administrative
option covered in this guide, with references to the pages on which the option appears.
Craft
Procedure
value (in
English)
Craft Procedure Purpose See
8021X Set 802.1X operational mode Setting The 802.1X Operational Mode on
page 28.
ADDR Address information
programming
Using The pre-installation checklist on
page 28 and Changing IP address
information on page 29.
CLEAR Clear all values to factory
defaults
Clearing the deskphone settings on
page 32.
DEBUG Enable/disable Debug Mode Disabling/enabling debug mode.
GROUP Set the Group Identifier Changing The group identifier on
page 33.
INT Interface Control Changing Ethernet interface control on
page 33.
LOGOUT Log off the deskphone Loging off The deskphone on
page 34.
RESET
VALUES
Reset system initialization
values to defaults
Resetting system values on page 35.
RESTART
PHONE
Restart the deskphone Restarting The deskphone on
page 36.
SSON Set the Site-Specific Option
Number
Changing SSON settings on page 36.
TEST Initiate a self-test Performing a self-test on page 37.
VIEW View current parameter values
and file names
Using The VIEW craft procedure for
troubleshooting on page 40.
Local administrative menu
Installing and maintaining Avaya B189 Conference IP Phone January 2014 27
To Next Page
Loading...
