Avaya B189 - Page 41

Table 1: IP Parameter Values
Name System Value Format
IP address
(Phone)
nnn.nnn.nnn.nnn Phone IP address, IPADD
value.
Call Server nnn.nnn.nnn.nnn IP address of the call server
currently in use, otherwise
0.0.0.0.
Router IP
address
nnn.nnn.nnn.nnn Up to 15 ASCII characters,
the IP address of the router in
use.
Subnet Mask nnn.nnn.nnn.nnn Up to 15 ASCII characters,
NETMASK value.
HTTP server nnn.nnn.nnn.nnn IP address of last HTTP
server used successfully
during initialization or
0.0.0.0. if no file server was
used successfully.
HTTPS server nnn.nnn.nnn.nnn IP address of last HTTPS
server used successfully
during initialization or
0.0.0.0. if no file server was
used successfully.
802.1Q cccc Text string corresponding to
the L2Q value.
VLAN ID cccc Up to 4 ASCII characters.
Value is L2QVLAN text Auto
if 802.1Q tagging is 0 or On if
802.1Q tagging is 1. If
802.1Q tagging is off (2), this
line is not displayed.
Static VLAN Test ccc Up to 3 ASCII characters.
Value is VLANTEST value if
802.1Q tagging is 0 or 1. If
802.1Q tagging is off (2), this
line is not displayed.
Table 2: Quality of Service Parameters
Parameter System value Format
L2 Audio n L2QAUD,layer 2 audio
priority value.
L2 Signaling n L2QSIG,layer 2 signaling
priority value.
Using the VIEW procedure for troubleshooting
Installing and maintaining Avaya B189 Conference IP Phone January 2014 41