Avaya JEM24 - Page 239

Parameter name Default
value
Description
DIALPLAN Null Specifies the dial plan used in the
phone.
Dialplan accelerates dialing by
eliminating the need to wait for the
INTER_DIGIT_TIMEOUT timer to
expire.
The value can contain 0 to 1023
characters. The default value is
null.
DISCOVER_AVAYA_ENVIRONMENT Specifies dynamic feature set
discovery
Value operation:
• 1: The phone discovers and
verifies if the controller supports
the AST feature set or not. The
phone sends a SUBSCRIBE
request to the active controller for
the Feature Status Event
Package (avaya-cm-feature-
status). If the request succeeds,
the phone proceeds with PPM
Synchronization. If the request is
rejected, or is proxied back to the
phone, or does not receive a
response, the phone assumes
that AST features are not
available.
• 0: The phone operates in a mode
where AST features are not
available.
Note:
Set the parameter to 0 for IP
Office environment.
DISPLAY_SSL_VERSION 0 Specifies whether OpenSSL and
OpenSSH versions are displayed in
the Administration menu.
Value operation:
• 0: OpenSSL and OpenSSH
versions are not displayed.
• 1: OpenSSL and OpenSSH
versions are displayed.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 239
Comments on this document? infodev@avaya.com