Avaya JEM24 - Page 240

Parameter name Default
value
Description
DND_SAC_LINK 0 Specifies whether to enable DND
and SAC link button in the menu.
The value of this parameter is used
if the
ALLOW_DND_SAC_LINK_CHANG
E is set to 0
Value operation:
• 0: To enable DND, and not SAC.
• 1: To enable DND and SAC.
Note:
Only Avaya J169/J179 IP
Phone supports this feature.
DNSSRVR Domain Name Server for Access
Profile 2
DOMAIN Null Specifies a character string that will
be appended to parameter values
that are specified as DNS names,
before the name is resolved.
The value can contain 0 to 255
characters. The default value is
null.
DOT1X Specifies the 802.1X pass-through
operating mode.
Pass-through is the forwarding of
EAPOL frames between the
phone's ethernet line interface and
its secondary (PC) ethernet
interface
Value operation:
• 0: EAPOL multicast pass-through
enabled without proxy logoff.
• 1: EAPOL multicast pass-through
enabled with proxy logoff.
• 2: EAPOL multicast pass-through
disabled.
DOT1XEAPS MD5 Specifies the authentication method
to be used by 802.1X.
Valid values are MD5, and TLS.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 240
Comments on this document? infodev@avaya.com