Avaya JEM24 - Page 242

Parameter name Default
value
Description
DSCPSIG 34 Specifies the layer 3 Differentiated
Services (DiffServ) Code Point for
signaling frames generated by the
phone.
Valid values are 0 through 63.
This parameter can also be set
through LLDP, which overwrites any
value set in this file.
DSCPVID 34 Specifies the layer 3 Differentiated
Services (DiffServ) Code Point for
video frames generated by the
phone.
Valid values are 0 through 63. The
default value is 34.
DSTOFFSET 1 Specifies the time offset in hours of
daylight savings time from local
standard time.
Valid values are 0, 1, or 2. The
default value is 1.
DSTSTART 2SunMar2L Specifies when to apply the offset
for daylight savings time.
The default value is 2SunMar2L
(the second Sunday in March at
2AM local time).
DSTSTOP 1SunNov2L Specifies when to stop applying the
offset for daylight savings time.
The default value is 1SunNov2L
(the first Sunday in November at
2AM local time).
DTMF_PAYLOAD_TYPE 120 Specifies the RTP payload type to
be used for RFC 2833 signaling.
Valid values are 96 through 127.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 242
Comments on this document? infodev@avaya.com