Avaya JEM24 - Page 243

Parameter name Default
value
Description
DUAL_IPPREF 4 DUAL_IPPREF controls the
following:
• The selection of SSON either
from DHCPv4 or DHCPv6 server,
when phone is in dual mode, and
• Whether an IPv4 or IPv6
addresses returned by DNS
would be tried first during
dualmode operation.
DHCP clients use DUAL_IPPREF
to decide which SSON
configuration attributes to apply for
DHCPv4 / DHCPv6 interworking in
dual mode.
Value operation:
• 4: IPv4 is preferred.
• 6: IPv6 is preferred.
E
EASG_SITE_AUTH_FACTOR Null Specifies Site Authentication Factor
code associated with the EASG site
certificate being installed. Valid
values are 10 to 20 character
alphanumeric string.
EASG_SITE_CERTS Null Specifies list of EASG site
certificates which are used by
technicians when they don't have
access to the Avaya network to
generate EASG responses for SSH
login. The URLs must be separated
by commas without any intervening
spaces. Valid values are 0 to 255
ASCII characters.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 243
Comments on this document? infodev@avaya.com