AVerTV 6
9
Import the existing frequency data: refer to the section 4.2.1 Scanning
Channels (Importing a Frequency Table) for details.
Manually add frequencies: refer to 4.2.2 Scanning Channels (Adding
Frequencies Manually) for details. If you add frequencies manually, please
make sure you specify the correct longitude data.
7. Click OK to exit the Satellite Information dialog box.
8. From the LNB drop-down list, choose the appropriate setting.
• None: If you do not use any LNB device, choose this option.
• Universal Ku Band LNB or C Band LNB: Choose this option if your LNB device
is this type.
• Custom: When you choose this option, click Edit to configure your own LNB
information, such as specifying an LNB name, its frequency type, input range, etc.
For related data, refer to the documentation that comes with your LNB device.
9. Repeat steps 1 to 8 if you need to configure Input 2, Input 3, etc. Then click Apply
to save the settings.
10. Select Programs under the Digital TV icon on the left pane, and click Program Scan
to start the scanning process.
11. Click Apply to save the scanning results.
Note: After Media Center Edition scan, you may not be able to lock channels with
AVerTV 6. Please restart the computer to make it function normally.
To Next Page
Loading...
