AVerTV 6
62
5.4 Selecting a Channel
To select a channel:
1. Click to open the Numeric Panel.
2. There are a number of ways to select a channel:
‧ Click on the Numeric buttons to select a channel.
‧
Click the Channel Up/Down button repeatedly until reaching your desired
channel.
OR,
‧ Use the
numeric keys on your keyboard to select a channel.
5.5 Skipping Unwanted Channels
If you want to exclude undesirable channels from your AM/FM channel list, do the
following:
1. Click the Setup button and in the Setup dialog
box, click AM/FM Radio icon in the left pane.
2. In the Program column, click the unwanted
channel. The check mark will be removed,
indicating that the channel will be excluded from
your channel list and that you won’t be able to
access and hear them through the Channel Up/Down button.
5.6 Adding a Radio Frequency
If the desired channel cannot be found through scanning, follow the instructions below.
1. Click the Setup button
and in the Setup dialog box, click AM/FM Radio icon in
the left pane.
2. Specify the correct frequency in the text box (as shown below) and click Save.
5.7 Modifying a Channel Name
You can manually modify any existing AM/FM radio channel.
1. Click the Setup button
and in the Setup dialog box, click on the AM/FM Radio
icon in the left pane.
2. Double click on the Name column of the existing AM/FM channel which you want to
modify.
3. Enter the name or description you want in the provided text box and then press Enter.
To Next Page
Loading...
