26
2EQUIPMENT DESCRIPTION
2.4 OPERATOR CONTROLS
ALS
350
450
2.4.2 Main switch
– The main switch [11] is located to the left on the
housing.
– The main switch is used to switch the machine on
and off.
WARNING!
Contact with energised components can re-
sult in life-endangering currents through the
body as well as burns. Voltage continues to
be present in the housing even when
switched off.
£ Only put the machine into operation when
installed in a correctly installed housing.
£ Maintain the machine in a dry condition.
[11] Main switch on the housing
A
To Next Page