91
Model E1070 Indicator Service Manual
Supervisor Menu—(continued)
28. Press the UNITS key. . .
CLEAR is displayed. Use this item to clear all the information
stored for this application. WARNING - Only do this if you are
sure you want the information permanently removed!
You may want to print out the report before clearing all the infor-
mation. See step 2 in this section.
29. Press the PRINT key to clear all the information
OR
Skip to step 29. . .
SURE? is displayed. This is asking if you are sure you want to
clear the information. If you are, press the ENTER key. If you do
not want to clear the data, press the SELECT key. . .
CLEAR is displayed.
30. Press the UNITS key. . .
PRINT is displayed.
31. Press the PRINT key. . .
PORT 1 is displayed.
32. Toggle between PORT 1 and PORT 2 using the TARE or UNITS key.
Press the ENTER key when your choice is displayed. . .
The recipes and batch report will be printed.
33. Press the SELECT key. . .
BATCH is displayed.
To Next Page
Loading...
