93
Model E1070 Indicator Service Manual
9. Press ENTER to accept the displayed choice. . .
TRIPS is displayed.
10. Press the UNITS key. . .
CLEAR is displayed. Use this item to clear all the information
stored for this application. WARNING - Only do this if you are
sure you want the information permanently removed!
You may want to print out the report before clearing all the infor-
mation. See step 2 in this section.
11. Press the PRINT key to clear all the information
OR
Skip to step 12. . .
SURE? is displayed. This is asking if you are sure you want to
clear the information. If you are, press the ENTER key. If you do
not want to clear the data, press the SELECT key. . .
CLEAR is displayed.
12. Press the SELECT key. . .
TARGET is displayed.
Supervisor Menu—(continued)
To Next Page
Loading...
