Reference
Avidyne EX500/EX600 MFD -130- 600-00078-001 Rev 05
11.2 Activating a 2-Way Datalink Account
If your MFD is equipped with an internal Quake Satellite
Communicator (Quake SC) transceiver and antenna or the external
MLX770 transceiver and its antenna, then you can use 2-Way
Datalink as described in this section.
To activate and use 2-Way Datalink, visit www.MyAvidyne.com
and
follow the account setup instructions to activate your system. Several
different price plans are available, including a no-minimum, pay-as-
you-go, and a flat-rate unlimited usage plan. You will need to provide
the appropriate serial number (Write down the number for future
reference):
● MLX770 serial number, displayed as MLX s/n on the Datalink
Setup page (Figure 10.5 on page 103).
● Datalink subscriber communicator (SC) serial number, displayed
as SC s/n on the EX500/EX600 Datalink Configuration page
(Figure 10.7 on page 113).
Your account on www.MyAvidyne.com
provides access to your billing
and usage statements. You can set your 2-Way Datalink user
preferences online prior to your flight. The preferences will be
downloaded to your EX500/EX600 via satellite the next time you fly.
To Next Page
Loading...
Need help?
General
