Avidyne EX600 User Manual

Reference
Avidyne EX500/EX600 MFD -154- 600-00078-001 Rev 05
11.14 Two-Way Datalink Messages
Table 11.15 Two-Way Datalink Messages
Two-Way Datalink
Messages & Colors
Meaning Recommended
Pilot Action
Datalink Sensor is
Operating Normally
Satellite communicator
is operating normally
after a recoverable fault
was previously
acknowledged.
Acknowledge
Datalink Sensor is
NOT Communicating
Satellite communicator
has stopped
communicating.
Restart system. If
problem persists,
contact Avidyne.
Datalink Sensor
Configuration Error
COMM port is configured
incorrectly.
Restart system. If
problem persists,
contact Avidyne.
Datalink Sensor Data
is Invalid
EX500/EX600 receives
a “recoverable fault”
notification.
Have maintenance
check
configuration and
installation.
Narrowcast METAR
symbols > 90 minutes
(Orbcomm Only)
METARs are older than
90 minutes from their
time of reception.
Acknowledge
Narrowcast METAR
symbols > 75 minutes
(Iridium Only)
METARs are older than
75 minutes from their
time of reception.
Acknowledge
Narrowcast AIRMETs/
SIGMETs > 90
minutes
AIRMETs/ SIGMETs are
older than 90 minutes.
Acknowledge
Narrowcast TFRs > 90
minutes
TFR data are older than
90 minutes.
Acknowledge
Narrowcast TAFs > 90
minutes
TAF data are older than
90 minutes.
Acknowledge
Narrowcast Lightning
> 20 minutes
Lightning information is
older than 20 minutes.
Acknowledge
Narrowcast Data not
yet received
Datalink is Enabled and
no Datalink data has
been received within 10
minutes of EX500/
EX600 initialization
complete.
Acknowledge

Avidyne EX600 Specifications

General

Brand	Avidyne
Model	EX600
Category	Monitor
Language	English